Cedar Creek

Live in Cedar Creek and need an auto electrician? This rural locality on the Albert River, split between the Gold Coast and Logan, is acreage and horse country, so floats, farm utes and wet-weather crossings bring in most of the work.

Sponsored

Be the auto electrician this area sees first

Reach drivers, tradies and fleet operators in this part of Gold Coast. See sponsor spots and prices.

Auto electricians in Cedar Creek

Own one of these businesses? Find it below and tap Claim it free to add your phone, website, hours and photos. Not listed yet? Use the claim form and we’ll add you.

No auto electricians are based in Cedar Creek itself yet. Businesses in the Coomera area service Cedar Creek.

Is your business missing? Tell us and we’ll add it free.

How can we help?

Need it fixed?

Get a quote from a local Cedar Creek auto electrician, for anything from a flat battery to a full fit-out.

Get a quote

Buying parts?

Quality auto electrical parts from Ozautoelectrics, an established Australian supplier since 2010, dispatched through a nationwide network. For retail and trade buyers.

Shop parts

Doing it yourself?

Free step-by-step guides written for Queensland conditions, with the parts you’ll need listed for each job.

Browse DIY guides

Auto electrician in Cedar Creek?

Are you an auto electrical business? List your business on this site.

List your business on this site

Cedar Creek at a glance

  • Area: Coomera, City of Gold Coast
  • Neighbours: Wongawallan, Kingsholme, Tamborine Mountain, Tamborine, Wolffdene, Logan Village
  • Main roads: Beaudesert-Beenleigh Road, Tamborine-Oxenford Road, Chardon Bridge Road, Plunkett Road
  • Typical work: horse float wiring and electric brakes, Anderson plugs and accessory power, water damage to connectors, work lights on utes, battery testing

Common auto electrical jobs in Cedar Creek

Cedar Creek covers about 39 square kilometres north of Tamborine National Park, with around 860 residents across both councils. Once timber and dairy country, it's now mostly rural acreage, including plenty of horse properties.

Horse float wiring and brakes

A float loaded with a horse is heavy and live, so its lights and brakes need to work every time. Electric brakes, a breakaway system and a reliable plug are essential, and many newer floats use a 12-pin plug to carry more circuits. If your car has a 7-pin socket and the float has a 12-pin plug, use a proper adaptor or rewire it correctly. Our guide on 7-pin vs 12-pin trailer plugs explains the differences.

Get it done: get a quoteDo it yourself: shop 12-pin trailer plugs

Anderson plugs for power on the go

Plenty of Cedar Creek utes and floats run extras: interior float lights, a water pump, a fridge or a battery for the electric brakes' breakaway system. An Anderson plug at the back of the tow vehicle, fed with heavy cable and fused at both ends, is a reliable way to supply that power. Use the right crimp tool, because a loose crimp gets hot under load. Our guide on how to wire an Anderson plug shows the method.

Get it done: get a quoteDo it yourself: shop Anderson plugs

Water in the wiring after wet weather

Low crossings and flooded gravel tracks are part of life near the Albert River after heavy rain. Water pushed into connectors, the trailer socket or a reversing light housing can cause faults days later as corrosion starts. If you've driven through deep water, check the lights and the trailer socket, and dry and protect anything that got wet. Never drive into floodwater: if it's flooded, forget it. Our guide on how to crimp wire connectors helps with sealed repairs.

Get it done: get a quoteDo it yourself: shop heat shrink connectors

Work lights for early starts

Feeding horses and checking fences before sunrise or after dark is easier with good lighting off the back of the ute. LED work lights draw little current and give a wide spread. Mount them where they won't dazzle other drivers, wire them through a relay and switch, and make sure they can't be left on while you're driving on the road. A wide-beam light on the rear also helps when hitching a float in the dark.

Get it done: get a quoteDo it yourself: shop LED work lights

Cedar Creek auto electrical questions

Does my horse float need electric brakes?

Under Australian trailer rules, trailers over 750 kg gross need brakes, and over 2,000 kg they need brakes that work on every wheel and can be applied from the driver's seat, plus a breakaway system. Most loaded two-horse floats fall into one of these brackets, so check your float's ATM and make sure the brakes and controller suit it.

Why do my trailer lights fail after rain?

Water gets into the plug, globe holders or a damaged section of wiring, and corrosion follows. The fault often appears days later and may come and go. Clean the plug pins, check for split insulation along the drawbar, and use sealed lights and heat-shrink connectors so moisture can't get back in.

Local tip for Cedar Creek

Before each trip to a show or pony club, hook up the float in the Cedar Creek driveway and check every light, the brakes and the breakaway battery charge. Breakaway batteries are often forgotten, and a flat one is no help in an emergency. A smart charger on it between outings keeps it ready.

Auto electricians near Cedar Creek

See the Coomera listings for auto electricians and mobile services that cover Cedar Creek.

Advertisement

Looking for parts in Cedar Creek?

Looking for parts in Cedar Creek? Search 12-pin trailer plugs, Anderson plugs and LED work lights: quality parts from Ozautoelectrics, dispatched Australia-wide.

Search auto electrical parts

Searches the full range at Ozautoelectrics, opening in a new tab. Popular: dual battery · LED light bars · trailer plugs · fuses

Nearby: Wongawallan · Kingsholme · Tamborine Mountain · Tamborine · Wolffdene · Logan Village

Run an auto electrical business in Cedar Creek?